MI-54000 Family of Elevation over Azimuth
PositionersFeatures
- Permits rotation of elevation axis at fixed azimuth
positions
- Rugged construction assures superior reliability and
longevity
Description
The MI-54000 Family of Elevation over Azimuth Positioners
permits the rotation of elevation at fixed positions of azimuth.
This particular orthogonal operation is desired in a telemetry
application. The positioners listed may be considered for
operation in a temperate climate or within the confines of a
radome for a low cost, manual telemetry application.
Specifications
|
|
54050C |
54150C |
54230C |
54260C |
54290C |
54450C |
|
Bending Moment (ft-lbs) |
800 |
2500 |
10000 |
10000 |
30000 |
75000 |
|
Vertical Load (lbs)
|
800 |
2500 |
10000 |
10000 |
30000 |
40000 |
|
Drive Motor (hp) |
|
|
|
|
|
|
|
- Elevation |
1/3 |
1/2 |
3/4 |
3/4 |
3/4 |
5 |
|
- Azimuth |
1/3 |
3/4 |
3/4 |
3/4 |
3/4 |
5 |
|
Delivered Torque (ft-lbs) |
|
|
|
|
|
|
|
- Elevation |
800 |
2500 |
10000 |
10000 |
30000 |
14000 |
|
- Azimuth |
500 |
1850 |
4200 |
14000 |
14000 |
25000 |
|
Max. Full Load Speed |
|
|
|
|
|
|
|
- Elevation (deg/min) |
200 |
140 |
32 |
32 |
20 |
20 |
|
- Azimuth (rpm) |
1.3 |
1.2 |
0.5 |
0.2 |
0.2 |
0.5 |
|
Position Accuracy (deg) |
|
|
|
|
|
|
|
- Elevation |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
|
- Azimuth |
0.03 |
0.03 |
0.03 |
0.02 |
0.02 |
0.02 |
|
Total Max. Gear Drive Backlash (deg) |
|
|
|
|
|
|
|
- Elevation |
0.08 |
0.05 |
0.05 |
0.05 |
0.03 |
0.03 |
|
- Azimuth |
0.15 |
0.10 |
0.08 |
0.08 |
0.08 |
0.05 |
|
Total Elevation Limit-to-Limit Travel (deg) |
+91,-45 |
+95,-45 |
+95,-45 |
+92,-45 |
+92,-45 |
+92,-45 |
|
Platform Size (in) |
18.5 x 21.38 |
28 x 28 |
36 x 36 |
36 x 36 |
42 x 42 |
50 x 50 |
|
Azimuth Center Access Hole Diameter (in) |
3 |
3 |
3 |
6 |
6 |
6 |
|
Base Outside Diameter (in) |
24 |
28.75 |
36 |
56 |
56 |
56 |
|
Height (in) |
44.2 |
45.5 |
54.7 |
83.68 |
91 |
106.75 |
|
Weight (lbs) |
780 |
800 |
1450 |
4100 |
6470 |
9500 |
Ordering Information
Each MI-54000 positioner is delivered as a single unit.
Cables and positioner control units are ordered separately. If
an RF path through the position is desired, please select the
appropriate option.
The MI-54000 Family of Elevation over Azimuth Positioners are
assembled in the (standard) eccentric configuration as shown.
All except the Model 54050 can easily be converted to the
concentric configuration during installation.
Configuration Options
|
Feedback |
Limit Switches |
Rotary Joint w/ RF path |
Slipring Assembly |
RF Switch Wiring |
Concentricity |
|
|
|
|
|
|
|
|
-FDS |
-LS |
-RJ0 |
-SR0 |
-SW0 |
-CE |
|
-FDS Dual speed synchro (36:1) |
-LS0 No limit switches
|
-RJ0 No rotary joint |
-SR0 No slip ring |
-SW0 No RF switch wiring |
-CE Eccentric |
|
-FI Inductosyn (both axis) |
-LS Limit
switches |
-RJ12 DC-12GHz |
-SR60 60 Conductor |
-SW RF switch wiring |
-CC Concentric |
|
|
|
-RJ18 DC-18GHz |
-SR84 84 Conductor |
|
|
|
|
|
-RJ40 DC-40GHz |
|
|
|
Options Compatibility Table
|
Model |
Feedback |
Limit Switches |
Rotary Joint w/RF path |
Slipring Assembly |
RF Switch Wiring |
Concentricity |
|
54050C (51150C/52050C) |
FDS Only |
Yes |
Yes AZ only |
SR60(AZ) only |
Yes |
No |
|
54150C (51230C/52150C) |
FDS Only |
Yes |
Yes AZ only |
SR60(AZ) only |
Yes Note 1 |
Yes |
|
54230C (51300C/52230C) |
FDS Only |
Yes |
Yes AZ only |
Yes |
Yes Note 1 |
Yes |
|
54260C (51430C/52230C) |
Yes |
Yes |
Yes AZ only |
Yes |
Yes Note 1 |
Yes |
|
54290C (51430C/52300C) |
Yes |
Yes |
Yes AZ only |
Yes |
Yes Note 1 |
Yes |
|
54450C (51450C/52450C) |
Yes |
Yes |
Yes AZ only |
Note 2 |
Yes |
Yes |
Note
1. Select either RF Switch Wiring or Slipring Assembly but not
both
2. Available upon special request. Consult Factory.
|
